R3497 Stainless Ball and Socket Joint | 128 kB | ![]() |
Stainless steel ball and socket joints with seal cap | 534 kB | ![]() |
Ball and socket joints | 2 MB | ![]() |
Metric linkages | 8 MB | ![]() |
R3497 Acis | 763 kB | ![]() |
R3497 IGES | 1 MB | ![]() |
R3497 Parasolid | 307 kB | ![]() |
R3497 ProE | 888 kB | ![]() |
R3497 SolidWorks | 2 MB | ![]() |
R3497 Step | 535 kB | ![]() |
R3497 Stainless Ball and Socket Joint
left hand thread - with flats on housing
Data Table
Order No. ![]() |
Thread (hand) ![]() |
d1 ![]() |
l1 ±0.3 ![]() |
d2 ![]() |
d3 ±0.5 ![]() |
d4 ±0.5 ![]() |
d5 ±0.5 ![]() |
h1 ±0.3 ![]() |
h2 ±0.3 ![]() |
l2 min. ![]() |
X g ![]() |
---|---|---|---|---|---|---|---|---|---|---|---|
R3497.L005 | Left | 8 | 22 | M5 | 8 | 12,8 | 8 | 10,0 | 9 | 10,2 | 15,2 |
R3497.L006 | Left | 10 | 25 | M6 | 10 | 14,8 | 10 | 12,5 | 11 | 11,5 | 25,2 |
R3497.L008 | Left | 13 | 30 | M8 | 13 | 19,3 | 13 | 16,5 | 13 | 14,0 | 53,1 |
R3497.L010 | Left | 16 | 35 | M10 | 16 | 24,0 | 16 | 20,0 | 16 | 15,5 | 103,8 |
R3497.L012 | Left | 16 | 35 | M12 | 16 | 24,0 | 16 | 20,0 | 16 | 15,5 | 103,8 |
R3497.L014 | Left | 22 | 45 | M14x1,5* | 22 | 30,0 | 22 | 28,0 | 20 | 21,5 | 220,9 |
R3497.L015 | Left | 22 | 45 | M14 | 22 | 30,0 | 22 | 28,0 | 20 | 21,5 | 220,9 |
R3497.L016 | Left | 22 | 45 | M16 | 22 | 30,0 | 22 | 28,0 | 20 | 21,5 | 220,9 |
Additional dimensions below.
Order No. ![]() |
h3 ![]() |
A/F h14 ![]() |
Min extraction force Kg ![]() |
Max static load Kg ![]() |
Max dynamic load Kg ![]() |
Max force required for movement Kg ![]() |
---|---|---|---|---|---|---|
R3497.L005 | 0,65 | 7 | 3 | 50 | 20 | 3 |
R3497.L006 | 0,70 | 8 | 4 | 100 | 40 | 4 |
R3497.L008 | 1,15 | 11 | 6 | 200 | 80 | 6 |
R3497.L010 | 1,15 | 13 | 8 | 400 | 160 | 8 |
R3497.L012 | 1,15 | 13 | 8 | 400 | 160 | 8 |
R3497.L014 | 0,50 | 17 | 10 | 800 | 320 | 10 |
R3497.L015 | 0,50 | 17 | 10 | 800 | 320 | 10 |
R3497.L016 | 0,50 | 17 | 10 | 800 | 320 | 10 |
Technical & Application
Material
Stainless steel (A2, AISI 303), sealing cap: neoprene.
Technical Notes
To DIN 71802 form CS, supplied with hexagon nut.
Safety ring aids the retention of the ball stud in the housing.
*M14x1,5 is a fine pitch thread.
Important Notes
Thread is not full length. There is a min 1.5mm unthreaded shank. If using part without the supplied nut, then please consider a counterbore to accommodate the unthreaded shank.
Useful Information
Value for Money Range:
DIN 71802:
- If you require stainless steel ball and socket joints to DIN 71802 then look no further than our R3466 range which are held in stock at low prices.
- We also stock these in left hand threads, our part number R3467.
CAD & Data Sheets
CAD files
R3497 Acis | 763 kB | ![]() |
R3497 IGES | 1 MB | ![]() |
R3497 Parasolid | 307 kB | ![]() |
R3497 ProE | 888 kB | ![]() |
R3497 SolidWorks | 2 MB | ![]() |
R3497 Step | 535 kB | ![]() |
Product Datasheets
R3497 Stainless Ball and Socket Joint | 128 kB | ![]() |
Stainless steel ball and socket joints with seal cap | 534 kB | ![]() |
Ball and socket joints | 2 MB | ![]() |
Metric linkages | 8 MB | ![]() |
If you can't read the product files please follow this link to install Adobe Acrobat Reader.